Fluke DSP-2000 Manual do Utilizador descarregar pdf (Página 100)

DSP-100/2000

Users Manual

4-24

Using the Tone Generator (Model DSP-2000)

If you have an inductive pickup device, you can use the test tool’s tone generator

to identify cable runs and connections. The tone generator produces a signal on

the cable under test. You can hear the signal as an audible tone when you place an

inductive pickup device near the cable or one of the cable’s connectors.

To use the tone generator, proceed as follows:

1. Turn the rotary switch to SPECIAL FUNCTIONS.

2. Use a patch cable of the correct impedance to connect the test tool to the

CABLE TEST jack.

3. Use D to highlight Tone Generator; then press E.

4. Use an inductive pickup device along the cable run or at far end connectors to

determine which cable is connected to the test tool.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 195 196

Sem comentários

Fluke DSP-2000 Manual do Utilizador Página 100