Fluke LinkRunner Especificações

April 2014© 2011-2014 Fluke Corporation.All product names are trademarks of their respective companies.LinkRunner™ AT 1000/2000Network Auto-TesterUser

Kit Contents3WWarningXUse only the AC adapter provided to charge the battery.WWarningsTo avoid possible electric shock or personal injury, follow thes

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual4Physical Featuresffy01.epsFigure 1. Physical Features67817161519189101112132345114

Physical Features5 On/off key.  Makes a selection on the screen. Shows the previous screen. Softkeys. The function of the softkey is shown above t

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual6The Home Screenffy15.epsFigure 2. The Home Screen  Switch: Shows the advertised and actual li

Battery Charging and Life7 Displays the connection type: PoE , 802.1x , fiber . For 802.1x, a green lock indicates authentication passed, yellow in

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual8AA BatteryThe typical battery life is approximately 3 hours. In Figure 4, steps 1-3 show how t

Common Questions LR-AT Can Solve9Q > Does this RJ45 drop support PoE?A > Use Tools to specify the desired PoE power class and use Switch or Auto

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual10application (select Tools > General Information to enable 802.1X and set up security).Savi

Set Up the Tester11NoteReport names can have a maximum of 12 characters. The extension LRS is appended when the file is saved to your PC through the L

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual12IP ConfigurationSelect Tools > IP Configuration.ffy40.bmpFigure 6. IP Configuration Screen

LIMITED WARRANTY AND LIMITATION OF LIABILITYEach Fluke Networks product is warranted to be free from defects in material and workmanship under normal

Set Up the Tester13AutoTest ConfigurationSelect Tools > AutoTest Configuration.ffy42.bmpFigure 8. AutoTest Configuration ScreenThis screen allows y

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual14Connect ConfigurationSelect Tools > Connect Configuration.ffy43.bmpFigure 10. Connect Conf

Set Up the Tester15Reflector Configuration (LR-AT 2000 Model)This screen is used to configure the LR-AT 2000 for remote access to Fluke Networks Ether

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual16NoteAny other Reflector setting may cause undesired traffic on your network.LinkRunner Inform

Set Up the Tester17To Load a Profile1Select Tools > Manage files.2Select Load Profile.3Select a Profile from the list. To Save a Profile1Select Too

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual18Restore Factory DefaultsRestores any configuration changes to the following LinkRunner AT fac

Set Up the Tester197In LinkRunner Manager, select LinkRunner > Update Software.8Click Select, find and select the update file (.zip extension), the

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual20Set LanguageTo change the language displayed in all screens1Select Tools > Set Language. 2

Using AutoTest, Switch, and Cable Test21The nearest switch is discovered and its name, port, VLAN ID, model, and IP address are displayed. Then the DH

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual22Using the Cable TestThere are three use models for using the Cable screen:•Connect a cable fr

SOFTWARE NOTICEThis product uses freeRTOS v6.0.5 software. For more information on freeRTOS, go to http://www.freertos.org. The software license state

Using the PoE Feature23Using the PoE FeaturePower over Ethernet (PoE) is disabled by default. To enable PoE, select Tools > PoE Configuration, and

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual24Without TruePower (Figures 22 and 23), the LinkRunner AT lists:•PoE class requested and the c

Using the PoE Feature25With TruePower enabled (LRAT-2000 only), the LinkRunner AT lists (Figures 24, 25, and 26):•PoE class requested and the class ac

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual26FFY53.pngFigure 26. AutoTest results - PoE with TruePower and Measured LoadUsing the Reflecto

Maintenance27MaintenanceWWarningXTo prevent possible fire, electrical shock, personal injury, or damage to the tester:•Do not open the case. You canno

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual28Adapter/charger for connection to an automobile cigarette lighter (For Li-ion battery pack)MS

Specifications29SpecificationsEnvironmental SpecificationsTable 3. Environmental SpecificationsOperating temperature 32ºF to 113ºF (0ºC to +45ºC)NoteT

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual30General Specifications

Specifications31Table 4. General SpecificationsMedia Access 10BASE-T, 100BASE-TX, 1000BASE-T (IEEE-802.3) and Poe (IEEE 802.3at)Cable Test Pair length

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual32LinkRunner Manager SoftwareTable 5. LinkRunner Manager SoftwareSupporting operating system Wi

iContentsTitle PageIntroduction ...

LinkRunner AT 1000/2000 Network Auto-TesterUsers ManualiiVLAN/MAC Configuration ...

iiiList of FiguresFigure Page1. Physical Features ...

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manualiv18. Nearest Switch Results ...

1LinkRunner AT 1000/2000Network Auto-TesterIntroductionLinkRunner AT 1000/2000 Network Auto-Tester enables you to quickly verify Ethernet copper and f

LinkRunner AT 1000/2000 Network Auto-TesterUsers Manual2Contact Fluke [email protected]+1-425-446-4519•Australia: