Fluke Work Light 39 Manual do Utilizador descarregar pdf (Página 51)

Using the Serial Cable (Model 41B)

Model 41B communicates with a PC or printer (Figure 19) through an

isolated RS-232 port. The Tester outputs data through the RS-232 port when

you press

or or when you send a command from the PC.

Note

The side of the optical interface connector marked “Optical

Interface RS-232-C” faces up when properly attached to the Model

41B.

Using the Configuration Screen, you can set

1.2, 9.6, or 19.2 KBAUD.

Other parameters are fixed as follows: 1 start bit, 8 data bits, 1 stop bit, and

no parity.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Sem comentários

Fluke Work Light 39 Manual do Utilizador Página 51